Thanks for those who have taken the Survey for Digital Forensics Tool Testing so far. For those who haven't taken the 4-mins survey which only has 15 easy to read questions to answer, please do so ( digital-forensics-tool-testing.html ). The larger the pool of anonymous answers being returned to the Faculty of Computer Science University of Sunderland for Dr. Graeme Horsman to analyse the better the feedback to you and the digital forensics community, as a whole, will be when Graeme publishes the findings.
Below are two youtube videos. Watch them both as they provide an interesting account of removing iPhone 5 ICs. These are general repair services for iPhone and not promoted as forensic chip off. In particular, pay attention to whether there are any good working practices and whether the operator's manner is acceptable for handling an exhibit?
Three observations I will share are (1) should the operator be wearing anti-static glovers?; (2) how would you keep contemporaneous notes (CN) simultaneously whilst removing a chip?; and (3) should you be testing chip off tools to understand their limitations before using them for chip removal and chip reading?
Please use weblinks
https://www.youtube.com/embed/jePWDxec9J0
https://www.youtube.com/embed/r5pC6zVMgSo
Investigations, Practices and Procedures: Seizure-Forensic Examination-Evidence. Cellular and Satellite Telephones, Call Records-Billing Data, Cell Site Analysis. Telecomms. Computer and Network Analysis. GPS devices & Jammers, Cyber, IoT forensics.
Showing posts with label unspoiled memory chips. Show all posts
Showing posts with label unspoiled memory chips. Show all posts
Sunday, May 28, 2017
Monday, April 22, 2013
Tools and Methods for Water Damaged Phones
Tools and Methods for Water Damaged Phones
It's worth recording the links from a discussion that has been being going on about water damaged phones:Ultrasonic cleaning - http://www.ibreakityoufixit.com/shop/catalog/2
Vermiculite - http://www.cmmp-france.com/shawatecgb.html
Fingerprint Study - http://www.ucidiver.com/fingerprint_study.html
Solder Cleaning - www.tayloredge.com/reference/Science/solder_cleaning.pdf
Isopropyl alcohol - http://gorum.ca/clen-pcb.html
Non-forensic chip off - http://trewmte.blogspot.co.uk/2011/02/mobile-phone-chip-off.html
Reballing - www.emulation.com/pdf/102003BGA_Reballing_Instruction_Manual.pdf
Thermal Profiling - http://en.wikipedia.org/wiki/Thermal_profile
RSS - http://en.wikipedia.org/wiki/File:RSS_Components_of_a_Profile1.svg
Thermal Sensor Probes - http://www.thermometersuperstore.co.uk/acatalog/Probes.html
Updated subject matter:
Hydrophobic Coatings on Electronic Devices
I have been looking further into mobile phone
exposure to water to see whether there has been any research or
techniques or processes used in manufacturing to combat water damage /
corrosions etc. Hydrophobic Coatings appears to offer one solution.
More cell phones are damaged by water than by any other means, and this damage often requires the devices to be discarded. The number of damaged phones is also increasing because these phones are now taken almost everywhere. Chemical vapor deposition may be used to provide a solution to this problem. For example, the phones may be coated with a hydrophobic monolayer or multilayer of fluorosilanes. Bonding of the fluorosilane may be adopted for improvement purposes using a primary adhesion layer, which may be a different silane monolayer, e.g., an isocyanatosilane, and/or by introduction of hydroxyl groups via plasma treatment. The latter process is identified as typically rapid and economical and can be applied both on oxide and polymeric materials. The presence of OH groups can be assayed by XPS, ToF-SIMS and ATR-FTIR. The density of surface hydroxyl groups can be varied by changing the proportions of etch gases, the time and intensity of the plasma treatment, and the system base pressure. The hydrophobicity of the surface can be characterised by contact angle goniometry and XPS and ToF-SIMS analysis of fluorine. Resistance to abrasion can be tested with a Martindale abrasion tester.
These selection of applied treatments appear to reduce and slow down the water damage/corrosion and present improved chances of memory retention in unspoiled memory chips.
I see a relevance for knowing about treatments, such as the above, as it can help on many levels: as background prep knowledge, towards a recovered exhibit examination procedure, for use in advisory role as to why some water damaged phone exhibits could produce better results or capable of undergoing tests than others phones, and so on.
More cell phones are damaged by water than by any other means, and this damage often requires the devices to be discarded. The number of damaged phones is also increasing because these phones are now taken almost everywhere. Chemical vapor deposition may be used to provide a solution to this problem. For example, the phones may be coated with a hydrophobic monolayer or multilayer of fluorosilanes. Bonding of the fluorosilane may be adopted for improvement purposes using a primary adhesion layer, which may be a different silane monolayer, e.g., an isocyanatosilane, and/or by introduction of hydroxyl groups via plasma treatment. The latter process is identified as typically rapid and economical and can be applied both on oxide and polymeric materials. The presence of OH groups can be assayed by XPS, ToF-SIMS and ATR-FTIR. The density of surface hydroxyl groups can be varied by changing the proportions of etch gases, the time and intensity of the plasma treatment, and the system base pressure. The hydrophobicity of the surface can be characterised by contact angle goniometry and XPS and ToF-SIMS analysis of fluorine. Resistance to abrasion can be tested with a Martindale abrasion tester.
These selection of applied treatments appear to reduce and slow down the water damage/corrosion and present improved chances of memory retention in unspoiled memory chips.
I see a relevance for knowing about treatments, such as the above, as it can help on many levels: as background prep knowledge, towards a recovered exhibit examination procedure, for use in advisory role as to why some water damaged phone exhibits could produce better results or capable of undergoing tests than others phones, and so on.
Subscribe to:
Posts (Atom)

